超薄X1C集塵箱。因?yàn)楹苊鐥l,所以不適合大量的垃圾印刷。像部分附加的圖像一樣添加油漆支持,就能完成漂亮的效果。 垃圾堆積的話會和斜坡連接起來,所以偶爾用手寫出來就可以了。 Slim type dust box for e it is slim,it is not suitable for printing that produces a large amount of dust。If you attach a paint support like the attached image,it will be a beautiful finish。 As garbage accumulates,it will be connected to the slope and come up,so it is a good idea to write it down by hand from time to time. 除了3D打印部件之外,還需要下列部件。 In addition to the 3D printed parts,the following parts are required. 3個(gè)直徑13 mm高2.5 mm的釹磁鐵 Neodymium magnets with a diameter of 13 mm and aheight of 2.5 mm:3pcs Https://