Raspberry Pi攝像機(jī)V2支架支架

This is my third veion of this Raspberry PI V2 Camera mount. The fit couple of veio i was going to use metal screws in the joints but I didn't like that and didn't want to go and get small bolts just for that so I made them. There is and exteion piece that can be used to extend the camera a little further away but doesn't need to be used. The camera mount snaps together. You may need to push the tab in with your nail because its a fairly tight fit. Please post if you make it and let me know if you have any issues. I pretty much printed everything with a 2 top, 2 bottom, 2 perimeter. I ran out of my white filament so went ahead with glow in the dark.