FYSETC 12864 全圖形智能控制器 LCD 外殼

Please note, this design was made to fit the Fysetc verison of the 12864 Full Graphics Smart Controller. I designed this because it is a slightly different form factor than the original model. I'm removing WIP status as it works. It's shoddy af and I'm not super happy with the overall design, but it serves its purpose. It's pretty solidly mounted on the front of my printer. UPDATE (5/6/2019): Added some reset butto! I printed mine in TPE and it works great. UPDATE (4/19/2019): I have uploaded pretty much the complete veion. It is a filthy disgusting mess and brings dishonor upon my family, but it works. UPDATE (4/15/2019): The encoder does not quite fit in the enclosure, the bezels are too large and off center, and the reset button is slightly off center. Will fix soon. UPDATE (4/14/2019 wow that's a long time): I've modeled up the top and bottom for the LCD. I have not printed and tested yet, but that will be done very soon. I intend to mount this with the mounting bracket for BLV mgn A8 mod, should work on AM8 just the same. UPDATE (1/8/2019): I got the display set up as a standard Full Graphic Smart Display in Marlin, I just had to invert the connecto (DEPENDENT ON CABLES) and encoder. I'll be working on the enclosure soon. EXPOSITION: I recently got a Full Graphics Smart Controller LCD from FYSETC on Aliexpress, and apparently wasn't looking too closely. It doesn't look exactly like the standard model. It says it is "for Anet A6," despite being a different orientation and whatnot. Well, I've had a 3D printer for a while now but have never gotten too deep into CAD... so here is my chance. This model does not have the second PCB under the display, has the two connecto at the bottom on the back itead of the top, and the base of the encoder is wider. Otherwise it appea to be mostly identical in form factor. I have printed an encoder knob for D shaft, and it seems to fit fine, if only slightly too loose. As I am new and slow to CAD (I'm using Fusion 360), I have uploaded the reference geometry I have created for it. Hopefully it is accurate. I'll be designing the enclosure soon, to be mounted on an AM8 (or other similar 2020/2040 profiles). I have included the STEP file for any modificatio you may want to do, I hope that is the correct format for that.