Fatshark HDO 16mm電源按鈕模塊（不取消保修）

This is a remix of a cover made by user AnthonyKwon.
This design DOES NOT void your OEM warranty from Fatshark! WHOOOO!
(Meaning no soldering or modificatio to stock Fatshark hardware is required for this modification.)
I would recommend printing this out of PETG & 100% infill with tree supports enabled in Cura.
Wiring Itructio:
Solder positive lead from male barrel connector to "NO" & "LED" terminals (shorted) on the power switch.
Solder negative lead from male barrel connector to the negative terminal on female barrel connector.
Solder positive terminal on female barrel connector to the "C" terminal on the power switch.
Solder negative terminal on female barrel connector to the "A" or "-" terminal on the power switch.
Wiring Itructio for fan mod:
Wire negative lead from fan connector to the negative terminal on female barrel connector.
Wire positive lead from fan connector to the "NO" & "LED" terminals (shorted) on the power switch.
(This mod eliminates the need to unplug and re-plug the 3 pin JST connector every time you want to power the Fatshark goggle fan.)
Supplies Needed:

Metal Push Button Toggle Switch (16mm 12V) by ESUPPORT


2.1mm x5.5mm 2 Pi DC Power Jack Female

Right Angled 90 Degree DC 5.5x2.1mm Barrel Jack 90 deg barrel jack&qid=1564104378&s=electronics&sr=1-2-fkmr3
If you like the work I have done and would like to show your appreciation by tipping me, here is my Paypal. Thanks in advance for your support! :)
DISCLAIMER: perform this mod at your own risk. Please check and doublecheck that your wiring is correct and verify the voltage of male barrel connector is correct PRIOR to plugging it into your goggles.
Feel free to ask questio if anything is unclear.