三維可打印線性驅(qū)動器

Video can be found here: https:www.youtube.com/watch?v=99aw_77oUvY Editable Fusion 360 source files can be found here: https:www.cgtrader.com/3d-print-models/hobby-diy/robotics/3d-printable-linear-actuator This linear actuator is almost completely 3D printed (except for the thread and some bolts, nuts and bearings).I curently don't have any position feedback or limited switches italled on it, I will add them in the feature when I'm going to integrate it in a projecct. It has a speed of about 25 mm on a 9V battery and draws about 1.7 Amps of curent. The motor is rated for 36 Volts. Running the linear actuator on a 36 Volt battery will increase the speed of the actuator. The tramission is a belt driven one wich uses a GT2 timing belt and a 3D printed GT2 pulley, This may not be the most ideal tramission for this task but it'll do for some testing. The linear actuator uses an M8 thread to convert the rotating motion into a linear motion. All parts (except for the 120 teeth pulley) are printed with a 1 mm nozle because there is no high accuracy required and it goes a lot faster. Some people are sceptic about using a 1mm nozzle but I think it's good for printing large objects like these without the need for accuracy. And it works great for me. Video can be found here: https:www.youtube.com/watch?v=99aw_77oUvY More info can be found here: https:hackaday.io/project/52706-3d-printable-linear-actuator Components used: 1 × l298N motor driver link: https:www.banggood.com/Wholesale-Dual-H-Bridge-DC-Stepper-Motor-Drive-Controller-Board-Module-Arduino-L298N-p-42826.html?p=E01411629100201406T1&custlinkid=255131 1 × Arduino nano V3 link: https:www.banggood.com/Geekcreit-ATmega328P-Nano-V3-Module-Improved-Veion-With-USB-Cable-Development-Board-For-Arduino-p-933647.html?p=E01411629100201406T1&custlinkid=255135 1 × 775 electric motor 36 Volt link: https:www.banggood.com/775-Gear-Motor-DC-12V-36V-3500-9000RPM-Motor-Large-Torque-High-power-Motor-p-1091058.html?rmmds=search&cur_warehouse=CN 1 × Pulley for motor side, 5mm bore, 16 teeth link: https:www.banggood.com/162036T-GT2-Aluminum-Timing-Pulley-For-DIY-3D-Printer-p-1001266.html?p=E01411629100201406T1&custlinkid=669283 2 × 8mm inner diameter bearings link: https:www.banggood.com/10pcs-8x19x6mm-Steel-Sealed-Shielded-Deep-Groove-Ball-Bearings-698ZZ-p-980204.html?rmmds=search&cur_warehouse=CN 1 × Gt2 timing belt 260-GT2-6https:www.robotdigg.com/product/283/260mm-264mm-268mm-280mm-288mm-or-294mm-gt2-endless-belt 1 × M8 thread rod 7 × M8 nuts Recommended tools: 3D-printer: https:www.banggood.com/Creality-3D-Ender-3-Pro-V-slot-Prusa-I3-DIY-3D-Printer-Kit-p-1346320.html?p=E01411629100201406T1&custlinkid=677427 All my project files, itructio, schematics, are provided for free so everyone around the world can enjoy them. Feel free to support me so I can create and share even more awsome projects. Any amount of support is greatly appreciated :-) paypal.me/BrianBrocken Feel free to take a look at my other desig: 3D printable antweight battlebot: Bulldog: https:www.thingivee.com/thing:4623536 SpaceX ipired edf rocket: https:www.thingivee.com/thing:4606751 3D printed high torque servo/gearbox veion 2: https:www.thingivee.com/thing:4547703 UMC - Univeal motion controller: https:www.thingivee.com/thing:4245315 3D-printable Davinci catapult gift card: https:www.thingivee.com/thing:4067668 Arduino controlled photogrammetry 3D-scanner: https:www.thingivee.com/thing:3958326 Fully 3D-printable turntable: https:www.thingivee.com/thing:3723618 RC FPV tank rover: https:www.thingivee.com/thing:3587738 Fully 3D-printable wind-up car gift card: https:www.thingivee.com/thing:3308710 3D-printable High torque servo/gear reduction: https:www.thingivee.com/thing:3292860 'BOOM box' high voltage capacitor bank case: https:www.thingivee.com/thing:2980012 Subby the interactive youtube subscriber robot: https:www.thingivee.com/thing:2928254 robot hand || bionic hand prosthesis prototype: https:www.thingivee.com/thing:2838239 3D-printable linear actuator: https:www.thingivee.com/thing:2783959 Mini 3D-printable crossbow: https:www.thingivee.com/thing:2710472 8 legged spider robot: https:www.thingivee.com/thing:2470882 best 3D-printable bearing: https:www.thingivee.com/thing:2349065 Have a nice day!