另一個任意立方光子簡易調平器+彈簧

Another veion of the great“any cubic photon easy leveler”by Wundelhts：
In this review the only improvements are the inclusion of pressure springs to avoid having to hold the plate by hand when fixing it and the position of the ierts are internal to exert more pressure on the guide screws.
印刷在平原上
The need are the same as in the other desig，only 4 springs and 4 ierts are included.
The freecad file is included.
1x M6x30
4×M3x8（使用原創）
4X M3x35
4×M4x16
4x springs 12mm oe6mm
4xM4 4mm?6mm ierts
PD：This modification together with the“twin rail Z”kit from Jacksonproducts made my photon much better in its behavior.
Wundelhtps的“Anycubic Photon Easy Leveler”的另20篇：
在這一修訂中，唯一的改進是增加壓力碼頭，以避免在設定時必須手握板塊，而密探的位置是室內，以便對引導螺絲施加更大的壓力。
印刷在PLA carbon
需要和其他設計一樣，只包括4個碼頭和4個地下室。
包括Freecad文件。
1x M6x30
4×M3x8（使用原件）
4X M3x35
4×M4x16
4×12mm O6mm碼頭
4X M4-4mm-6mm
這個修改加上Jacksonproducts的“Twin Rail Z”套件使我的Photon的行為大為改善。